Choosing the Best Attic Insulation

Any discussion about proper attic insulation has to start with a firm knowledge of R-value, the measurement used by industry professionals to rate the insulation’s ability to resist the loss of heat from inside. R-value is the ability of a material to fight, as a minimum, the thermal resistance experienced at various temperatures. The four factors that affect the R-value are the type of covering used, ambient temperature, roof construction, and frequency of use. The following four considerations usually influence the insulation’s R-value:

insulation

Different types of attic Insulation Salt Lake City are available to address different climates. Most systems have two or more layers of materials designed to perform effectively in specific environments. Combinations of materials are sometimes used to improve performance. The most common materials used in insulating the attic are foam board, cellulose or paperboard, mineral wool, mineral spray, or loose-fill. The effectiveness of any one of these types of systems is typically limited to climates with intermediate R values, where small amounts of air leaks would allow moisture into the system, and environments with extreme cold or warm conditions would allow air to leak out of the system, thus reducing its R-value.

Air and moisture, both of which penetrate through traditional attic insulation, are allowed to travel through the layers of foam board, mineral wool or loose-fill material. If any of these materials is found to be damp, moldy, or suffering from water damage, the entire insulation is likely to become ineffective. Moisture can increase the R-value of the attic insulation, and air leaks allow moisture to seep into the ceiling and walls. This process also contributes to unhealthy indoor air quality.

The roof system is the most effective way to insulate the attic. The insulation should be installed in accordance with local building codes to get the best results. New insulation should be checked regularly for efficiency; old insulating materials should be removed and properly discarded, and the proper attic insulation should be replaced if found to be ineffective in controlling moisture and air infiltration. The installation of a new roof system is much more expensive than the installation of attic insulation.

Installing the right attic insulation requires a professional approach, especially if it is to be done by an inexperienced do-it-yourselfer. Different types of materials require different methods when applied. For instance, it would be impossible to install fiberglass batt insulation on the exterior walls of a cold climate. If, on the other hand, the homeowner decides to install a tightly packed cellulose-type of attic insulation, it might be possible to do so with ease. All of these types require different methods of installation, and professionals have access to all of these techniques and are very well skilled at their job.

It is also important to determine the right R-value (efficient thermal resistance) for attics. To find this out, a thermal resistance test must be performed. It is usually performed by a thermal or r-value analysis expert to determine the appropriate amount of insulation needed to prevent energy loss.

Installing the best attic insulation will not only improve your energy bills, but will also make your home safer. Fiberglass batt insulation, for example, can provide excellent insulation against heat flow and intrusion, and it can also provide excellent protection from moisture. It is important to select the right material depending on the climate in the area and the type of house construction. Installing blanket insulation around loose-fill walls will also help to keep the attic dry and free from moisture problems.

If you install the proper attic insulation, you will not need to spend a lot of money keeping your home warm. In fact, in warmer climates, blanket insulation will serve as an excellent source of extra heat by reducing air gaps between spaces and between walls. Fiberglass batt insulation should be installed according to local building codes, and you may wish to consult with experts about the best materials and configurations for your region. If the job is done correctly, you should see the results for yourself and feel confident that your home is properly insulated.

Is Spray Foam Insulation Right For You?

Spray foam insulation is a great option for Michigan residents. But there are some things that some insulation businesses may try to hide from you. This information will help you find the best spray foam insulation contractor in your area. You will learn how to make an educated choice and save yourself money!

spray foam insulation

You have many choices among insulation companies when it comes to their level of expertise. Some companies like Spray Foam Insulation Michigan boast years of experience insulating your home and property, while others may not have a lot of experience. If you’re trying to make an informed decision, you need to make sure that you don’t choose a company with too much experience insulating your home or property surrounding areas.

One of the things that an inexperienced spray foam insulation company may try to hide is the fact that they do not possess the proper equipment to do the job properly. They may claim to have a high r-value, but then fail to actually use those tools. A high r-value is a measure of how much of a surface can be insulated with one inch of spray foam. If the insulation company is using tools that don’t match this standard, you may get less than one inch of insulation for every square foot of the sprayed surface area.

Another thing that many insulation installation companies attempt to hide is the fact that they use a high amount of polyurethane in the spray foam insulation installation. The polyurethane is a toxic chemical that can cause nausea, vomiting, and asthma in even small amounts. If the spray-foam insulation company accidentally uses too much polyurethane, you could be seriously injured. Although there are regulations in place to prevent the use of harmful chemicals during insulation installation, some companies still use them.

In addition to using harmful chemicals, many insulation companies try to avoid the use of non-tubing blowers. These blowers use a fan-like action to force hot air through spaces that would not fit through standard flues. Although the hot air may feel good at first, it causes large amounts of damage to your home. This is because the spray foam insulation does not adequately insulate the home. Instead, the hot air is forced through smaller air leaks that often go unnoticed by homeowners.

Insulation installation companies that fail to offer a free estimate do so because they don’t really know what they’re doing. If they had the proper equipment, along with the proper training, they could very well provide a professional and safe service to their clients. You should never contact us today without first experiencing insulating the walls yourself. If we are unable to do it, then we won’t be able to help you.

Another thing that our customers want to know about our energy saver is whether or not our spray foam insulation can be installed without damaging the walls. The answer to this question is a resounding yes! If you have an old home that needs insulating then you should seriously consider spray foam. Even if you’re just trying to cut back on energy costs, you’ll find that this can be a great energy saver.

There are many things to learn about in order to find the best spray foam insulation service for your home. As always, we recommend that you research before contacting us. We want to work with you to ensure that our job is done correctly, but that you also get the value for your money. This is why it’s important that you contact us today for a free estimate. Our skilled engineers will help you every step of the way. This is how you find out if we can help you with your insulating needs.